[1]赵金龙.油管输送射孔井下封井技术研究[J].油气井测试,2018,27(03):46-51.[doi:10.19680/j.cnki.1004-4388.2018.03.008]
　ZHAO Jinlong.Research on well sealing technology of tubing conveyed perforating[J].Well Testing,2018,27(03):46-51.[doi:10.19680/j.cnki.1004-4388.2018.03.008]
点击复制

油管输送射孔井下封井技术研究()
分享到：

《油气井测试》[ISSN:1006-6977/CN:61-1281/TN]

卷:
27
期数:
2018年03期
页码:
46-51
栏目:
出版日期:
2018-06-25

文章信息/Info

Title:
Research on well sealing technology of tubing conveyed perforating
文章编号:
1004-4388(2018)03-0046-06
作者:
赵金龙
中国石油大庆油田有限责任公司试油试采分公司 黑龙江大庆 163412
Author(s):
ZHAO Jinlong
Well Testing Company of PetroChina Daqing Oilfield Company Limited, Daqing, Heilongjiang 163412, China
关键词:
射孔; 完井; 油管输送射孔; 井下封井; 密封; 井控; 环保; 安全
Keywords:
perforation;  completion;  tubing conveyed perforating;  sealing well downhole;  sealing;  well control;  environmental protection;  safety
分类号:
TE353
DOI:
10.19680/j.cnki.1004-4388.2018.03.008
文献标志码:
B
摘要:
油管输送射孔在超压井施工起下管柱时会发生井口溢流、井涌和井喷等现象，既会造成环境污染又存在安全性问题。为此研究了适合油田射孔作业特点的油管输送射孔井下封井技术。井下封井器主要包括锚定机构、坐封机构、丢手机构三部分，采用上提下放锚定方式和上提拉断销钉丢手方式进行封井。在管输射孔枪定位、起爆后，上提管柱至油层顶界，直接封隔油层，可有效预防井喷事故。下完井管柱时，底部直接连接打捞工具将其解封，完井后处于不坐封、不坐卡状态，不影响油井正常生产及水井正常配注，在减少劳动强度的基础上有效避免了环境污染等事故的发生。现场应用结果表明，整套工具的各项技术指标都满足设计要求，工具在井下能够顺利完成锚定、胶筒密封和管柱丢手等各项规定动作，且开关动作灵活，安全可靠，为油管输送射孔提供有力的技术支持。
Abstract:
The phenomenon of wellhead overflow, kickout and blowout occurs when the tubing conveyed perforating (TCP) operates in the overpressure well, which can cause environmental pollution and safety problems. In order to solve these problems, this paper has developed a TCP downhole sealing technology that is suitable for the perforating operations in oilfields. The downhole packer mainly includes three parts: an anchoring mechanism, a setting sealing mechanism, and a releasing mechanism. The well is sealed by the method of hoisting up or setting down anchoring and the method of pulling up and broking pin to release. After positioning and detonating the TCP gun, lifting the string to the top boundary of the oil layer to seal the oil layer directly, which can prevent blowout accidents effectively. When landing string completed, the bottom is directly connected with the fishing tool to unseal it so that it is in a state of no setting and no sticking after the completion, so as not to affect the normal production of the well and the normal injection of the water well, which effectively avoided accidents such as environmental pollution on the basis of reducing labor. The field application results show that all the technical indicators of the tool meet the design requirements, and the tool can smoothly complete the specified actions such as anchoring, sealing of the cartridge, and releasing in the downhole, moreover the switching action is flexible, safe and reliable. It can provide technical support for the TCP.

相似文献/References:

[1]马金良,刘泽宇,李春宁,等.一趟管柱分层射孔与水力泵排液联作技术[J].油气井测试,2018,27(02):23.[doi:10.19680/j.cnki.1004-4388.2018.02.004]
　MA Jinliang,LIU Zeyu,LI Chunning,et al.Integration of layered perforation and flowback by hydraulic pump in one trip[J].Well Testing,2018,27(03):23.[doi:10.19680/j.cnki.1004-4388.2018.02.004]
[2]张兴华,周新宇,杨子,等.APR测试工艺在压裂测试井中的技术创新[J].油气井测试,2018,27(05):13.[doi:10.19680/j.cnki.1004-4388.2018.05.003]
　ZHANG Xinghua,ZHOU Xinyu,YANG Zi,et al.Technical innovation of APR testing technology in fracturing test wells [J].Well Testing,2018,27(03):13.[doi:10.19680/j.cnki.1004-4388.2018.05.003]
[3]李东传,曹振斌.聚能射孔器同孔重复射孔作用效果试验研究[J].油气井测试,2019,28(02):40.[doi:10.19680/j.cnki.1004-4388.2019.02.007]
　LI Dongchuan,CAO Zhenbin.Test on effect of repetitive perforation of jet perforator with the same hole[J].Well Testing,2019,28(03):40.[doi:10.19680/j.cnki.1004-4388.2019.02.007]
[4]张启龙,龚宁,徐刚,等.渤海油田ICD分仓控水方案设计和控水效果评价方法[J].油气井测试,2019,28(02):61.[doi:10.19680/j.cnki.1004-4388.2019.02.011]
　ZHANG Qilong,GONG Ning,XU Gang,et al.Design of ICD water control scheme and evaluation method in Bohai Oilfield[J].Well Testing,2019,28(03):61.[doi:10.19680/j.cnki.1004-4388.2019.02.011]
[5]陈建旭.中东地区GA井实时监测完井工艺技术[J].油气井测试,2019,28(04):27.[doi:10.19680/j.cnki.1004-4388.2019.04.005]
　CHEN Jianxu.Realtime monitoring and completion technology for Well GA in Middle East[J].Well Testing,2019,28(03):27.[doi:10.19680/j.cnki.1004-4388.2019.04.005]
[6]黄生松,许大智,卢刚,等. 高温深井液压桥塞坐封工艺技术[J].油气井测试,2020,29(04):29.[doi:10.19680/j.cnki.1004-4388.2020.04.005]
　HUANG Shengsong,XU Dazhi,LU Gang,et al. Setting and sealing technology of hydraulic bridge plug in high temperature and deep well[J].Well Testing,2020,29(03):29.[doi:10.19680/j.cnki.1004-4388.2020.04.005]
[7]刘飞,张凯权,朱永国,等. 过油管桥塞封堵工艺改进[J].油气井测试,2020,29(04):35.[doi:10.19680/j.cnki.1004-4388.2020.04.006]
　LIU Fei,ZHANG Kaiquan,ZHU Yongguo,et al. Plugging technology improvement of through tubing bridge plug[J].Well Testing,2020,29(03):35.[doi:10.19680/j.cnki.1004-4388.2020.04.006]
[8]杨晓莉,颜晋川. 河坝嘉二气藏衬管完井及分流酸化技术[J].油气井测试,2021,30(01):41.[doi:10.19680/j.cnki.1004-4388.2021.01.008]
　YANG Xiaoli,YAN Jinchuan.Liner completion and distributary acidizing technology in Heba JIA2 gas reservoir[J].Well Testing,2021,30(03):41.[doi:10.19680/j.cnki.1004-4388.2021.01.008]
[9]王福国,袁贵德,靳周,等. 英中地区高温高压高含硫SX58井试油测试工艺技术[J].油气井测试,2021,30(02):7.[doi:10.19680/j.cnki.1004-4388.2021.02.002]
　WANG Fuguo,YUAN Guide,JIN Zhou,et al.Production test technology of Well SX58 with high temperature, high pressure and high sulfur content in Yingzhong area[J].Well Testing,2021,30(03):7.[doi:10.19680/j.cnki.1004-4388.2021.02.002]
[10]骆劲羽,杨晓勇,张鹏,等.射孔压裂封隔一体化压裂管柱的改进[J].油气井测试,2021,30(05):50.[doi:10.19680/j.cnki.1004-4388.2021.05.009]
　LUO Jinyu,YANG Xiaoyong,ZHANG Peng,et al.Improvement of perforation, fracturing and packer integrated fracturing string[J].Well Testing,2021,30(03):50.[doi:10.19680/j.cnki.1004-4388.2021.05.009]
[11]刘文凤,金海锋,麻惠杰,等.埕海油田大位移井射孔与电潜泵联作试油技术[J].油气井测试,2018,27(05):19.[doi:10.19680/j.cnki.1004-4388.2018.05.004]
　LIU Wenfeng,JIN Haifeng,MA Huijie,et al.Testing technology of combing perforation and ESP for extended reach well in Chenghai Oilfield[J].Well Testing,2018,27(03):19.[doi:10.19680/j.cnki.1004-4388.2018.05.004]

备注/Memo

备注/Memo:
 2018-01-04 收稿, 2018-03-10 修回, 2018-03-21 接受, 2018-06-15 网络版发表
赵金龙，男，1982年出生，工程师，2007年毕业于西南石油大学勘查技术与工程专业，现从事试油测试工程技术工作。电话：0459-5680802，13796987129；Email：zhaojinlong2005@163.com。地址：黑龙江省大庆市乘南18街试油试采分公司试验大队工程技术办，邮政编码：163412。
更新日期/Last Update: 2018-08-12