[1]陈建旭.中东地区GA井实时监测完井工艺技术[J].油气井测试,2019,28(04):27-31.[doi:10.19680/j.cnki.1004-4388.2019.04.005]
　CHEN Jianxu.Realtime monitoring and completion technology for Well GA in Middle East[J].Well Testing,2019,28(04):27-31.[doi:10.19680/j.cnki.1004-4388.2019.04.005]
点击复制

中东地区GA井实时监测完井工艺技术()
分享到：

《油气井测试》[ISSN:1006-6977/CN:12-1485/TE]

卷:
28
期数:
2019年04期
页码:
27-31
栏目:
出版日期:
2019-08-25

文章信息/Info

Title:
Realtime monitoring and completion technology for Well GA in Middle East
文章编号:
1004-4388(2019)04-0027-05
作者:
陈建旭
中国石油集团长城钻探工程公司测试公司 北京 100101
Author(s):
CHEN Jianxu
Testing Branch, Great Wall Drilling Corporation, Beijing 100101, China 
关键词:
完井;  实时监测;  滑套;  投捞堵塞器;  分层合采;  逐层测试
Keywords:

completion;  realtime monitoring;  slipper;  fishing plug;  layered commingled production;  layerbylayer testing

 ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ; 

分类号:
TE353
DOI:
10.19680/j.cnki.1004-4388.2019.04.005
文献标志码:
B
摘要:

为实时监测中东地区GA井存在生产层流体情况，提出一种常规完井和实时监测相结合的完井方案，可在生产过程中将两个生产层适时分采和合

采。通过打开和关闭生产层滑套和投捞堵塞器，实现对目的层逐层和两层合并测试，分别取得地层压力、流体温度等数据及两个产层流体样品，与实时监测数据进行对

比，两套数据基本吻合，其中压力平均相差001 MPa，温度平均相差05 ℃。该工艺验证了实时监测技术与完井工艺结合的适用性，为制定油田开发方案和增产措施

提供了可靠依据。

Abstract:

In order to monitor the fluids of production zone in real time in Well GA in the Middle East region, a completion

scheme which combines conventional completion with realtime monitoring was introduced in this paper，which can realize the separate production

and commingled production for the two production layers in time during the production process. The target layer was tested together or layer by

layer by opening and closing production slipper and fishing plug,and the data of formation pressure, fluid temperature and two production layer

fluid samples were obtained respectively. By compared with the realtime monitoring data, it was found that the two sets of data basically

coincide with each other. The average differences of pressure and temperature was 001 MPa and 05 ℃ respectively. The process validates the

applicability of the combination of realtime monitoring technology and completion technology, and provides a reliable basis for formulating

oilfield development plan and stimulation measures

相似文献/References:

[1]赵金龙.油管输送射孔井下封井技术研究[J].油气井测试,2018,27(03):46.[doi:10.19680/j.cnki.1004-4388.2018.03.008]
　ZHAO Jinlong.Research on well sealing technology of tubing conveyed perforating[J].Well Testing,2018,27(04):46.[doi:10.19680/j.cnki.1004-4388.2018.03.008]
[2]刘文凤,金海锋,麻惠杰,等.埕海油田大位移井射孔与电潜泵联作试油技术[J].油气井测试,2018,27(05):19.[doi:10.19680/j.cnki.1004-4388.2018.05.004]
　LIU Wenfeng,JIN Haifeng,MA Huijie,et al.Testing technology of combing perforation and ESP for extended reach well in Chenghai Oilfield[J].Well Testing,2018,27(04):19.[doi:10.19680/j.cnki.1004-4388.2018.05.004]
[3]张启龙,龚宁,徐刚,等.渤海油田ICD分仓控水方案设计和控水效果评价方法[J].油气井测试,2019,28(02):61.[doi:10.19680/j.cnki.1004-4388.2019.02.011]
　ZHANG Qilong,GONG Ning,XU Gang,et al.Design of ICD water control scheme and evaluation method in Bohai Oilfield[J].Well Testing,2019,28(04):61.[doi:10.19680/j.cnki.1004-4388.2019.02.011]
[4]王鹏.电缆输送式电动液压坐封桥塞技术[J].油气井测试,2019,28(05):39.[doi:10.19680/j.cnki.1004-4388.2019.05.007]
　WANG Peng.Wireline electrohydraulic bridge setting technology[J].Well Testing,2019,28(04):39.[doi:10.19680/j.cnki.1004-4388.2019.05.007]
[5]黄生松,许大智,卢刚,等. 高温深井液压桥塞坐封工艺技术[J].油气井测试,2020,29(04):29.[doi:10.19680/j.cnki.1004-4388.2020.04.005]
　HUANG Shengsong,XU Dazhi,LU Gang,et al. Setting and sealing technology of hydraulic bridge plug in high temperature and deep well[J].Well Testing,2020,29(04):29.[doi:10.19680/j.cnki.1004-4388.2020.04.005]
[6]刘飞,张凯权,朱永国,等. 过油管桥塞封堵工艺改进[J].油气井测试,2020,29(04):35.[doi:10.19680/j.cnki.1004-4388.2020.04.006]
　LIU Fei,ZHANG Kaiquan,ZHU Yongguo,et al. Plugging technology improvement of through tubing bridge plug[J].Well Testing,2020,29(04):35.[doi:10.19680/j.cnki.1004-4388.2020.04.006]
[7]杨晓莉,颜晋川. 河坝嘉二气藏衬管完井及分流酸化技术[J].油气井测试,2021,30(01):41.[doi:10.19680/j.cnki.1004-4388.2021.01.008]
　YANG Xiaoli,YAN Jinchuan.Liner completion and distributary acidizing technology in Heba JIA2 gas reservoir[J].Well Testing,2021,30(04):41.[doi:10.19680/j.cnki.1004-4388.2021.01.008]
[8]崔龙兵,樊凌云,邹伟,等. 顺北油田超深井可回收式套管封隔器失效因素分析及改进对策[J].油气井测试,2022,31(01):22.[doi:10.19680/j.cnki.1004-4388.2022.01.004]
　CUI Longbing,FAN Lingyun,ZOU Wei,et al.Failure factor analysis and improvement countermeasures of recyclable casing packer in ultradeep wells in Shunbei Oilfield[J].Well Testing,2022,31(04):22.[doi:10.19680/j.cnki.1004-4388.2022.01.004]
[9]王福祥. 井下安全阀现场操作常见问题及解决办法[J].油气井测试,2023,32(05):19.[doi:10.19680/j.cnki.1004-4388.2023.05.004]
　[J].Well Testing,2023,32(04):19.[doi:10.19680/j.cnki.1004-4388.2023.05.004]

备注/Memo

备注/Memo:
 2018-09-04收稿，2019-04-28修回，2019-06-02接受，2019-08-20 网络版发表
中国石油集团长城钻探工程公司重大技术攻关项目“海外复杂油气井测试工艺技术研究及应用”（GWDC20180205）

陈建旭，男，1984年出生，工程师，2008年毕业于中国石油大学（华东）机械设计制造及其自动化专业，主要从事测试

完井工作。电话：010-59285804，13522427140；Email： cjx.gwdc@cnpc.com.cn 。通信地址：北京市朝阳区安立路101号名人大厦1718室，邮政编码：100101。

更新日期/Last Update: 2019-09-03