[1]刘世界,蔡振华,丁万贵,等.临兴区块“一点法”产能方程[J].油气井测试,2020,29(05):74-78.[doi:10.19680/j.cnki.1004-4388.2020.05.013]
 LIU Shijie,CAI Zhenhua,DING Wangui,et al.Deliverability equation with “onepoint method” for Linxing block[J].Well Testing,2020,29(05):74-78.[doi:10.19680/j.cnki.1004-4388.2020.05.013]
点击复制

临兴区块“一点法”产能方程()
分享到:

《油气井测试》[ISSN:1006-6977/CN:12-1485/TE]

卷:
29卷
期数:
2020年05期
页码:
74-78
栏目:
出版日期:
2020-10-25

文章信息/Info

Title:
Deliverability equation with “onepoint method” for Linxing block
文章编号:
1004-4388(2020)05-0074-05
作者:
刘世界1蔡振华1丁万贵2董建宏2杨宇光2刘成桢1
1.中海油能源发展股份有限公司工程技术分公司 天津 300452
2.中联煤层气有限责任公司 北京 100011
Author(s):
LIU Shijie1 CAI Zhenhua1 DING Wangui2 DONG Jianhong2 YANG Yuguang2 LIU Chengzhen1
1.Engineering Technology Branch of CNOOC Energy Development Co., Ltd., Tianjin 300452, China
2.China United Coalbed Methane Co. Ltd., Beijing 100011, China
关键词:
临兴区块 产能方程 修正等时试井 无阻流量 一点法 生产动态
Keywords:
Linxing Block deliverability equation modified isochronal test openflow potential onepoint method dynamic production performance
分类号:
TE353
DOI:
10.19680/j.cnki.1004-4388.2020.05.013
文献标志码:
B
摘要:
临兴区块产能测试资料缺乏,难以获得较为准确的“一点法”产能方程。采用不稳定动态分析方法拟合气井生产动态数据,校正储层渗透率、表皮系数和裂缝长度等参数,建立气井产量—压力计算模型。通过该模型,模拟修正等时试井过程,获得气井无阻流量、二项式产能方程系数A、B及对应的经验系数α。该方法应用于临兴区块13口井,利用生产动态资料计算α系数平均值为092,得到本区块压裂气井“一点法”产能方程。计算结果与实际相比,误差为40%,符合临兴区块地质气藏特征。
Abstract:
Since it lacks productivity testing data in Linxing Block, it is difficult to obtain an accurate deliverability equation with onepoint method. Through fitting dynamic production data of gas wells with transient dynamic analysis method, the parameters, such as reservoir permeability, skin coefficient and fracture length, are corrected, and the productionpressure calculation model of gas wells is established. The process of modified isochronal test is simulated and corrected with this method to obtain the openflow potential of gas wells as well as the coefficients A and B of the binomial deliverability equation and the corresponding empirical coefficient α. This method was applied to 13 wells in Linxing Block. The average value of α coefficient was calculated to be 092 by using dynamic production data, and the deliverability equation of fractured gas wells with onepoint method in this area was obtained. Compared with the actual production data, the error of the calculation result is 40%, which is consistent with the geological characteristics of the gas reservoirs in the Linxing Block.

相似文献/References:

[1]张慧宇. 致密气藏试井异常资料产能计算新方法[J].油气井测试,2019,28(02):1.[doi:10.19680/j.cnki.1004-4388.2019.02.001]
 ZHANG Huiyu.A new method of productivity calculation for wells with abnormal testing data in tight gas reservoir[J].Well Testing,2019,28(05):1.[doi:10.19680/j.cnki.1004-4388.2019.02.001]
[2]曹朋亮,杨小松,张一果,等.致密低渗气藏水平井新的产能评价“一点法”[J].油气井测试,2019,28(06):1.[doi:10.19680/j.cnki.1004-4388.2019.06.001]
 CAO Pengliang,YANG Xiaosong,ZHANG Yiguo,et al.“Single point”productivity evaluation method for horizontal wells in tight and low permeability gas reservoirs[J].Well Testing,2019,28(05):1.[doi:10.19680/j.cnki.1004-4388.2019.06.001]
[3]陈建华,骆逸婷,刘凯,等.考虑应力敏感影响的气井产能分析新方法[J].油气井测试,2020,29(02):1.[doi:10.19680/j.cnki.1004-4388.2020.02.001]
 CHEN Jianhua,LUO Yiting,LIU Kai,et al.A new method for gas well productivity analysis considering stress sensitivity[J].Well Testing,2020,29(05):1.[doi:10.19680/j.cnki.1004-4388.2020.02.001]
[4]张云鹏,杨生文,赵战江,等.临兴区块致密砂岩气藏裸眼水平井分段压裂技术[J].油气井测试,2021,30(02):61.[doi:10.19680/j.cnki.1004-4388.2021.02.012]
 ZHANG Yunpeng,YANG Shengwen,ZHAO Zhanjiang,et al.Staged fracturing technology of open hole horizontal well in tight sandstone gas reservoir of Linxing block[J].Well Testing,2021,30(05):61.[doi:10.19680/j.cnki.1004-4388.2021.02.012]

备注/Memo

备注/Memo:
2019-12-27收稿,2020-08-20修回,2020-09-01接受,2020-10-20网络版发表
中国海洋石油总公司重大科研项目“致密砂岩气产能指数及预测方法研究”(CNOOCKJ 135KJXM NFGJ2016-05)
刘世界,男,1988年出生,硕士,工程师,2014年获得成都理工大学石油与天然气工程专业硕士学位,现从事于油气田开发方面的研究工作。电话:022-66907420,13920969713;Email:270577177@qq.com。通信地址:天津市滨海新区塘沽滨海新村西区研究院主楼712室,邮政编码:300452。
更新日期/Last Update: 2020-11-16