[1]刘超群.大庆油田不动管柱6~8层压裂工艺[J].油气井测试,2021,30(05):44-49.[doi:10.19680/j.cnki.1004-4388.2021.05.008]
　LIU Chaoqun. Fracturing technology of 68 layers of immovable string in Daqing Oilfield[J].Well Testing,2021,30(05):44-49.[doi:10.19680/j.cnki.1004-4388.2021.05.008]
点击复制

大庆油田不动管柱6~8层压裂工艺()
分享到：

《油气井测试》[ISSN:1006-6977/CN:12-1485/TE]

卷:
30卷
期数:
2021年05期
页码:
44-49
栏目:
出版日期:
2021-10-25

文章信息/Info

Title:
 Fracturing technology of 68 layers of immovable string in Daqing Oilfield
文章编号:
1004-4388(2021)05-0044-06
作者:
刘超群
中国石油大庆油田有限责任公司试油试采分公司 黑龙江大庆 163412
Author(s):
 LIU Chaoqun
 Testing Branch, PetroChina Daqing Oilfiled Co., Ltd., Daqing, Heilongjiang 163412, China
关键词:
大庆油田; 不动管柱; 逐级解封; 多层压裂; 滑套; 排量; 加砂量; 封隔器
Keywords:
 ; 

Daqing Oilfield;  immovable string;  unsealing stepbystep;  multilayer fracturing;  sliding sleeve; 

displacement;  sand amount;  packer

分类号:
TE357
DOI:
10.19680/j.cnki.1004-4388.2021.05.008
文献标志码:
B
摘要:

大庆油田现有不动管柱多层压裂技术单趟管柱压裂1~5层，在压裂层数及改造规模上不能满足储层改造的需求。通过合理选择配套工具、优化管柱

结构、设计逐级解封工具等，实现一趟管柱最多压裂8层，单层最大加砂量达到200 m3，全井加砂量500 m3，施工排量及最大过液量均满足储层改造需求。采用该工艺对

YX58井进行7层压裂，单段最大加砂量为180 m3，累计加砂4295 m3，最高泵压570 MPa，期间滑套均正常打开，工艺成功。不动管柱6~8层压裂技术可有效减少管

柱起下次数，降低储层损害程度，为储层精细划分及有效改造提供技术支持。

Abstract:
 

The existing immovable string multilayer fracturing technology in Daqing Oilfield can

fracture 15 layers with a trip string, which cannot meet the needs of reservoir reconstruction in terms of the number of fracturing layers and

reconstruction scale. Through reasonable selection of supporting tools, optimization of string structure and design of stepbystep unsealing tools,

the maximum fracturing of 8 layers per trip is realized, the maximum sand adding amount of single layer is 200 m3, the sand adding amount of the

whole well is 500 m3, and the construction displacement and maximum liquid passing amount meet the needs of reservoir reconstruction. This process

is used to conduct 7layer fracturing for Well YX58, the maximum sand addition in a single section is 180 m3, with the cumulative sand addition

is 4295 m3 and the maximum pump pressure is 570 MPa, during which the sliding sleeve can be opened normally, and the process is successful. The

fracturing technology of 68 layers of immovable string can effectively reduce the times of string tripping, reduce the degree of reservoir damage,

and provide technical support for fine reservoir division and effective transformation

相似文献/References:

[1]马梓涵.水力喷射压裂工艺管柱性能改进[J].油气井测试,2019,28(02):56.[doi:10.19680/j.cnki.1004-4388.2019.02.010]
　MA Zihan.Performance improvement of string for hydraulic jet fracturing technology[J].Well Testing,2019,28(05):56.[doi:10.19680/j.cnki.1004-4388.2019.02.010]
[2]王瑞滨.大庆油田大斜度井试油工艺[J].油气井测试,2019,28(03):31.[doi:10.19680/j.cnki.1004-4388.2019.03.006]
　WANG Ruibin.Oil testing technology for highly deviated wells in Daqing Oilfield[J].Well Testing,2019,28(05):31.[doi:10.19680/j.cnki.1004-4388.2019.03.006]
[3]于书新,吴丹丹,程晓刚,等.大庆油田浅层气井扩容式射孔技术[J].油气井测试,2020,29(05):21.[doi:10.19680/j.cnki.1004-4388.2020.05.004]
　YU Shuxin,WU Dandan,CHENG Xiaogang,et al.Expandable perforating technology for shallow gas wells in Daqing Oilfield[J].Well Testing,2020,29(05):21.[doi:10.19680/j.cnki.1004-4388.2020.05.004]
[4]王文胜.不动管柱多层压裂窜槽原因分析[J].油气井测试,2020,29(05):39.[doi:10.19680/j.cnki.1004-4388.2020.05.007]
　WANG Wensheng.Cause analysis of channeling in multilayer fracturing with fixed string[J].Well Testing,2020,29(05):39.[doi:10.19680/j.cnki.1004-4388.2020.05.007]
[5]刘柏超. 大庆油田电缆带压直读技术[J].油气井测试,2021,30(01):36.[doi:10.19680/j.cnki.1004-4388.2021.01.007]
　LIU Baichao. Direct reading technology of cable under pressure in Daqing Oilfield[J].Well Testing,2021,30(05):36.[doi:10.19680/j.cnki.1004-4388.2021.01.007]
[6]蔡苗苗.注入井套管保护封隔器密封性判定技术[J].油气井测试,2021,30(06):51.[doi:10.19680/j.cnki.1004-4388.2021.06.009]
　CAI Miaomiao.Sealing evaluation technology of casing protection packer in injection wells[J].Well Testing,2021,30(05):51.[doi:10.19680/j.cnki.1004-4388.2021.06.009]
[7]马梓涵,王金友,张宏岩,等.大庆油田水力喷射压裂的产业化研究[J].油气井测试,2022,31(03):39.[doi:10.19680/j.cnki.1004-4388.2022.03.007]
　MA Zihan,WANG Jinyou,ZHANG Hongyan,et al.Study on industrialization of hydrajet fracturing in Daqing Oilfield[J].Well Testing,2022,31(05):39.[doi:10.19680/j.cnki.1004-4388.2022.03.007]
[8]吕宜珈. 一种适用于页岩油气井工厂化体积压裂的新型液体破胶剂[J].油气井测试,2023,32(04):39.[doi:10.19680/j.cnki.1004-4388.2023.04.007]
　[J].Well Testing,2023,32(05):39.[doi:10.19680/j.cnki.1004-4388.2023.04.007]
[9]杨景海,齐占奎,梁旭,等. 大庆油田开发试井解释技术新进展及展望[J].油气井测试,2024,33(05):56.[doi:10.19680/j.cnki.1004-4388.2024.05.009]
　[J].Well Testing,2024,33(05):56.[doi:10.19680/j.cnki.1004-4388.2024.05.009]

备注/Memo

备注/Memo:
2020-09-02收稿，2021-07-28修回,2021-08-03接受,2021-10-20网络版发表

中国石油大庆油田有限责任公司科研项目“一趟管柱多层压裂及多层测试工艺技术研究”

（110017333002026）

刘超群，男，1989年2月出生，硕士，工程师，2011年毕业于中国石油大学（北京）石油工程专业

，从事试油现场技术指导及管理工作。电话：04595680719；Email：liuchaoqun@petrochina.com.cn 。通信地址：黑龙江省大庆市让胡路区试油试采分公司试油大队，邮政编码：163412。


更新日期/Last Update: 2021-11-25