[1]孙海林,张鹏,杨小涛,等.油气田注水区块再压裂方案参数设计方法[J].油气井测试,2020,29(05):6-13.[doi:10.19680/j.cnki.1004-4388.2020.05.002]
　SUN Hailin,ZHANG Peng,YANG Xiaotao,et al.Parameter design method for refracturing scheme of water injection block in oil and gas field[J].Well Testing,2020,29(05):6-13.[doi:10.19680/j.cnki.1004-4388.2020.05.002]
点击复制

油气田注水区块再压裂方案参数设计方法()
分享到：

《油气井测试》[ISSN:1006-6977/CN:12-1485/TE]

卷:
29卷
期数:
2020年05期
页码:
6-13
栏目:
出版日期:
2020-10-25

文章信息/Info

Title:
Parameter design method for refracturing scheme of water injection block in oil and gas field
文章编号:
1004-4388(2020)05-0006-08
作者:
孙海林; 张鹏; 杨小涛; 徐克彬; 陈清; 赵琦
中国石油集团渤海钻探工程有限公司井下作业分公司 河北任丘 062552
Author(s):
SUN Hailin;  ZHANG Peng;  YANG Xiaotao;  XU Kebin;  CHEN Qing;  ZHAO Qi
Downhole Operating Branch, CNPC Bohai Drilling Engineering Company, Renqiu, Hebei 062552, China
关键词:
 ; 压裂改造; 注水断块; 压裂方案; 灰色综合评价; 支持向量机; 复合叠加核函数
Keywords:
fracturing;  water injection fault block;  fracturing scheme;  grey comprehensive evaluation;  support vector machine;  composite superposition kernel function
分类号:
TE21
DOI:
10.19680/j.cnki.1004-4388.2020.05.002
文献标志码:
A
摘要:
针对低渗透油藏注水开发后，老井压裂改造需要重新确定压裂参数的问题，开展注水区块再压裂方案参数设计研究。根据注水区块特点，补充选井因素，采用经过改进的综合储层地质和生产注采因素的灰色关联度综合评价方法优选压裂井位；建立适于小样本群分析的支持向量机技模型，参考邻井施工经验数据给出各井施工参数，完成注水区块压裂施工方案编制，引入复合叠加核函数，提高预测精度。通过对压裂选井选层及施工参数推荐数学模型改进研究，形成注水区块再压裂方案参数设计方法。应用该方法，在L43断块优选出8口老井进行压裂增产改造，均顺利完成设计加砂，平均日产油量从21 m3提高到77 m3，压后增产显著，提高了L43断块整体产油量。油气田注水区块再压裂方案参数设计方法符合注水开发区块增产需求，选井参数全面，降低样本规模限制，对注水区块老井压裂具有指导意义。
Abstract:
After the development with waterinjection technology for lowpermeability reservoirs, the fracturing parameters of old wells need to be redetermined, and the research on the parameter design of refracturing schemes for water injection blocks is carried out. According to the characteristics of the water injection block, using well selection factors, this paper adopts an improved comprehensive evaluation method of gray correlation degree combining comprehensive reservoir geology and production injectionproduction factors to optimize the position of fracturing well. In addition, through the establishment of support vector mechanism model suitable for small sample group analysis and referring to the construction experience data of adjacent wells, the construction parameters of each well are given, and the fracturing operation scheme of water injection block is compiled. The prediction accuracy is improved by introducing the composite superposition kernel function. Through improving the mathematical model of well selection, layer selection and construction parameters recommendation, the parameter design method of refracturing scheme in water injection block is formed. By using this method, eight old wells were selected for fracturing and stimulation in the L43 fault block, and the sand addition was successfully completed. The average daily oil production increased from 21 m3 to 77 m3. After fracturing, the production increased significantly 〖JP2〗and the overall oil production of the L43 fault block was increased. The parameter design method of refracturing scheme in water injection block of oil and gas field meets the demand of increasing production of water injection development block, the well selection parameters are comprehensive, and the sample size limit is reduced, which has guiding significance for old well fracturing in water injection block.   

相似文献/References:

[1]姚锋盛,蒋佩,黄兴鸿.火山岩储层增产改造难点及技术研究[J].油气井测试,2013,22(05):0.
[2]曹银萍,黄宇曦,于凯强,等. 基于ANSYS Workbench完井管柱流固耦合振动固有频率分析[J].油气井测试,2018,27(01):1.[doi:10.19680/j.cnki.1004-4388.2018.01.001]
　CAO Yinping,HUANG Yuxi,YU Kaiqiang,et al. Natural frequency analysis for fluidsolid coupling vibration of completion string based on ANSYS workbench[J].Well Testing,2018,27(05):1.[doi:10.19680/j.cnki.1004-4388.2018.01.001]
[3]高 超,艾 昆,高 辉,等. 基于施工压力曲线的综合滤失系数测试方法及压裂参数优化[J].油气井测试,2018,27(01):8.[doi:10.19680/j.cnki.1004-4388.2018.01.002]
　GAO Chao,AI Kun,GAO Hui,et al.Test method of total leak-off coefficient and optimization of fracturing parameters based on operation pressure curves[J].Well Testing,2018,27(05):8.[doi:10.19680/j.cnki.1004-4388.2018.01.002]
[4]周小林,高志华,张 冲.龙凤山气田大通径免钻桥塞分段压裂先导试验[J].油气井测试,2018,27(01):62.[doi:10.19680/j.cnki.1004-4388.2018.01.010]
　ZHOU Xiaolin,GAO Zhihua,ZHANG Chong. Pilot tests of staged fracturing involving largediameter drillfree bridge plugs in the Longfengshan gas field[J].Well Testing,2018,27(05):62.[doi:10.19680/j.cnki.1004-4388.2018.01.010]
[5]魏 聪,陈宝新,刘 敏,等. 基于反褶积技术的S气井不稳定试井解释[J].油气井测试,2018,27(01):73.[doi:10.19680/j.cnki.1004-4388.2018.01.012]
　WEI Cong,CHEN Baoxin,LIU Min,et al. Interpretation of pressure transient well testing data of S gas well based on deconvolution technique[J].Well Testing,2018,27(05):73.[doi:10.19680/j.cnki.1004-4388.2018.01.012]
[6]张中宝.塔河油田深抽杆式泵一体化管柱工艺[J].油气井测试,2018,27(02):27.[doi:10.19680/j.cnki.1004-4388.2018.02.005]
　ZHANG Zhongbao.Deep integrated rod pumping string applied in Tahe Oilfield[J].Well Testing,2018,27(05):27.[doi:10.19680/j.cnki.1004-4388.2018.02.005]
[7]李军贤.地层出砂井测试工艺优化[J].油气井测试,2018,27(02):47.[doi:10.19680/j.cnki.1004-4388.2018.02.008]
　LI Junxian.Optimization of testing techniques for wells with formation sand production[J].Well Testing,2018,27(05):47.[doi:10.19680/j.cnki.1004-4388.2018.02.008]
[8]田向东,康 露,杨 志,等.海上油气井快速诱喷测试技术[J].油气井测试,2018,27(02):41.[doi:10.19680/j.cnki.1004-4388.2018.02.007]
　TIAN Xiangdong,KANG Lu,YANG Zhi,et al.Fast testing of induced flows in offshore oil/gas wells[J].Well Testing,2018,27(05):41.[doi:10.19680/j.cnki.1004-4388.2018.02.007]
[9]张 毅,于丽敏,任勇强,等.一种新型可降解压裂封隔器坐封球[J].油气井测试,2018,27(02):53.[doi:10.19680/j.cnki.1004-4388.2018.02.009]
　ZHANG Yi,YU Limin,REN Yongqiang,et al.A new type of degradable setting ball for fracturing packers[J].Well Testing,2018,27(05):53.[doi:10.19680/j.cnki.1004-4388.2018.02.009]
[10]褚春波,郭 权,黄小云,等.有限元分析径向水力压裂裂缝扩展影响因素[J].油气井测试,2018,27(02):59.[doi:10.19680/j.cnki.1004-4388.2018.02.010]
　CHU Chunbo,GUO Quan,HUANG Xiaoyun,et al.Finiteelement analysis on influencing factors for propagation of fractures induced in radial jet hydraulic fracturing[J].Well Testing,2018,27(05):59.[doi:10.19680/j.cnki.1004-4388.2018.02.010]
[11]王鑫鑫,霍丽丽,张辉,等. 利用地层测试资料指导低渗透砂岩储层压裂改造选层[J].油气井测试,2020,29(05):54.[doi:10.19680/j.cnki.1004-4388.2020.05.010]
　WANG Xinxin,HUO Lili,ZHANG Hui,et al. Application of formation test data to guide fracturing candidate for lowpermeability sandstone reservoirs[J].Well Testing,2020,29(05):54.[doi:10.19680/j.cnki.1004-4388.2020.05.010]

备注/Memo

备注/Memo:
 2020-02-27收稿，2020-08-20修回，2020-09-01接受，2020-10-20 网络版发表
国家重大专项“油气田及煤层气开发”子课题“储层改造关键流体研发”任务七“新型压裂液施工工艺技术及现场试验”（2017ZX05023003-007）
孙海林，男，1969年8月出生，高级工程师，1995年毕业于江汉石油学院石油地质勘查专业，从事油气田开发技术及管理工作。 电话：0317-2723758，15130735386；Email：sunhailin @cnpc.com.cn。通信地址：河北省任丘市会战南道渤海钻探井下作业分公司，邮政编码：062552。
更新日期/Last Update: 2020-11-16