[1]杨坤,王九州,于秋来.等孔径射孔工艺技术[J].油气井测试,2021,30(03):25-31.[doi:10.19680/j.cnki.1004-4388.2021.03.005]
　YANG Kun,WANG Jiuzhou,YU Qiulai.Perforating technology with equal aperture[J].Well Testing,2021,30(03):25-31.[doi:10.19680/j.cnki.1004-4388.2021.03.005]
点击复制

等孔径射孔工艺技术()
分享到：

《油气井测试》[ISSN:1006-6977/CN:12-1485/TE]

卷:
30卷
期数:
2021年03期
页码:
25-31
栏目:
出版日期:
2021-06-25

文章信息/Info

Title:
Perforating technology with equal aperture
文章编号:
1004-4388(2021)03-0025-07
作者:
杨坤1; 王九州2; 于秋来1
1.中国石油大庆油田有限责任公司试油试采分公司  黑龙江大庆  163412
2.中国石油国际勘探开发有限公司  北京  100000      
Author(s):
YANG Kun1;  WANG Jiuzhou2;  YU Qiulai1
1.Testing Branch, PetroChina Daqing Oilfield Co., Ltd., Daqing, Heilongjiang 163412, China
2.China National Oil and Gas Exploration and Development Corporation (CNODC), Beijing 100000, China
关键词:
 ; 扶正装置;  射孔弹;  孔径;  孔道;  差异度;  水力压裂;  导流能力
Keywords:
 ; centralizing device;  perforating charge;  aperture;  channel;  difference degree;  hydraulic fracturing
分类号:
TE353
DOI:
10.19680/j.cnki.1004-4388.2021.03.005
文献标志码:
B
摘要:

 
常规射孔及特殊井射孔施工时，由于射孔器在套管内偏靠一侧，枪管壁与套管壁之间间隙不同，导致套管壁上射孔孔径与地层射孔孔道不均

匀，降低了射孔孔道导流能力，影响后续水力压裂施工效果，甚至影响后续开发改造效果。通过理论分析以及对常规四相位90°射孔器、水平井三相位120°射孔器地面检测

试验，设计了直井居中扶正装置和大斜度井旋转扶正装置，开发了等孔径射孔弹，在工艺及器材上实现均匀孔径射孔。射孔后，水力压裂施工压力较常规射孔施工压力降低了

112%。该技术可应用于致密油（气）水平井大规模压裂及常规射孔压裂投产井，满足油田水力压裂开发改造的需求。

Abstract:
 

In the conventional perforation and special well perforation construction, because the

perforator is on one side of the casing and the gap between the barrel wall and the casing wall is different, the perforation hole diameter on the

casing wall is not uniform with the formation perforation channel, which reduces the conductivity of the perforation channel, affects the subsequent

hydraulic fracturing construction effect, and even affects the subsequent development and transformation effect. Through theoretical analysis and ground

test of conventional fourphase perforator with the degree of 90 and threephase perforator with degree of 120 in horizontal well, the centering

device in vertical well and rotary centering device in highly deviated well are designed, and the equal aperture perforating charge is developed to

realize uniform perforation in technology and equipment. After perforating, the hydraulic fracturing pressure is reduced by 112% compared with

conventional perforating. The technology can be applied to largescale fracturing of tight oil and gas horizontal wells and conventional perforating

fracturing wells to meet the needs of oilfield hydraulic fracturing development and transformation.

相似文献/References:

[1]曹银萍,黄宇曦,于凯强,等. 基于ANSYS Workbench完井管柱流固耦合振动固有频率分析[J].油气井测试,2018,27(01):1.[doi:10.19680/j.cnki.1004-4388.2018.01.001]
　CAO Yinping,HUANG Yuxi,YU Kaiqiang,et al. Natural frequency analysis for fluidsolid coupling vibration of completion string based on ANSYS workbench[J].Well Testing,2018,27(03):1.[doi:10.19680/j.cnki.1004-4388.2018.01.001]
[2]高 超,艾 昆,高 辉,等. 基于施工压力曲线的综合滤失系数测试方法及压裂参数优化[J].油气井测试,2018,27(01):8.[doi:10.19680/j.cnki.1004-4388.2018.01.002]
　GAO Chao,AI Kun,GAO Hui,et al.Test method of total leak-off coefficient and optimization of fracturing parameters based on operation pressure curves[J].Well Testing,2018,27(03):8.[doi:10.19680/j.cnki.1004-4388.2018.01.002]
[3]周小林,高志华,张 冲.龙凤山气田大通径免钻桥塞分段压裂先导试验[J].油气井测试,2018,27(01):62.[doi:10.19680/j.cnki.1004-4388.2018.01.010]
　ZHOU Xiaolin,GAO Zhihua,ZHANG Chong. Pilot tests of staged fracturing involving largediameter drillfree bridge plugs in the Longfengshan gas field[J].Well Testing,2018,27(03):62.[doi:10.19680/j.cnki.1004-4388.2018.01.010]
[4]魏 聪,陈宝新,刘 敏,等. 基于反褶积技术的S气井不稳定试井解释[J].油气井测试,2018,27(01):73.[doi:10.19680/j.cnki.1004-4388.2018.01.012]
　WEI Cong,CHEN Baoxin,LIU Min,et al. Interpretation of pressure transient well testing data of S gas well based on deconvolution technique[J].Well Testing,2018,27(03):73.[doi:10.19680/j.cnki.1004-4388.2018.01.012]
[5]张中宝.塔河油田深抽杆式泵一体化管柱工艺[J].油气井测试,2018,27(02):27.[doi:10.19680/j.cnki.1004-4388.2018.02.005]
　ZHANG Zhongbao.Deep integrated rod pumping string applied in Tahe Oilfield[J].Well Testing,2018,27(03):27.[doi:10.19680/j.cnki.1004-4388.2018.02.005]
[6]李军贤.地层出砂井测试工艺优化[J].油气井测试,2018,27(02):47.[doi:10.19680/j.cnki.1004-4388.2018.02.008]
　LI Junxian.Optimization of testing techniques for wells with formation sand production[J].Well Testing,2018,27(03):47.[doi:10.19680/j.cnki.1004-4388.2018.02.008]
[7]田向东,康 露,杨 志,等.海上油气井快速诱喷测试技术[J].油气井测试,2018,27(02):41.[doi:10.19680/j.cnki.1004-4388.2018.02.007]
　TIAN Xiangdong,KANG Lu,YANG Zhi,et al.Fast testing of induced flows in offshore oil/gas wells[J].Well Testing,2018,27(03):41.[doi:10.19680/j.cnki.1004-4388.2018.02.007]
[8]张 毅,于丽敏,任勇强,等.一种新型可降解压裂封隔器坐封球[J].油气井测试,2018,27(02):53.[doi:10.19680/j.cnki.1004-4388.2018.02.009]
　ZHANG Yi,YU Limin,REN Yongqiang,et al.A new type of degradable setting ball for fracturing packers[J].Well Testing,2018,27(03):53.[doi:10.19680/j.cnki.1004-4388.2018.02.009]
[9]褚春波,郭 权,黄小云,等.有限元分析径向水力压裂裂缝扩展影响因素[J].油气井测试,2018,27(02):59.[doi:10.19680/j.cnki.1004-4388.2018.02.010]
　CHU Chunbo,GUO Quan,HUANG Xiaoyun,et al.Finiteelement analysis on influencing factors for propagation of fractures induced in radial jet hydraulic fracturing[J].Well Testing,2018,27(03):59.[doi:10.19680/j.cnki.1004-4388.2018.02.010]
[10]庞伟.酸性气藏深井产能试井方法[J].油气井测试,2018,27(02):67.[doi:10.19680/j.cnki.1004-4388.2018.02.011]
　PANG Wei.Deliverability test method for deep sour gas wells[J].Well Testing,2018,27(03):67.[doi:10.19680/j.cnki.1004-4388.2018.02.011]

备注/Memo

备注/Memo:

2020-07-29收稿，2021-04-20修回,2021-05-03接受,2021-06-20网络版发表
中国石油天然气股份有限公司重大科技专项“大庆油气持续有效发展关键技术研究与应用”的课题10“难采储量有效动用

技术研究与试验”（2016E-10）                  
杨坤，男，1984年出生，工程师，2006年毕业于大庆石油学院电气工程及其自动化专业，现主要从事射孔新技术研发、推广等工作。电话：0459-5685094，15045966767；Email：sk_yangkun@petrochina.com.cn。通信地址：黑龙江省大庆市让胡路区乘南十八街试油试采分公司，邮政编码：163412。                  

更新日期/Last Update: 2021-08-10