[1]郝龙图. 葡48X区块微波持水率测试方法[J].油气井测试,2021,30(06):57-60.[doi:10.19680/j.cnki.1004-4388.2021.06.010]
　HAO Longtu. Microwave water holding rate test method for Pu48X block[J].Well Testing,2021,30(06):57-60.[doi:10.19680/j.cnki.1004-4388.2021.06.010]
点击复制

 葡48X区块微波持水率测试方法()
分享到：

《油气井测试》[ISSN:1006-6977/CN:12-1485/TE]

卷:
30卷
期数:
2021年06期
页码:
57-60
栏目:
出版日期:
2022-01-19

文章信息/Info

Title:
 Microwave water holding rate test method for Pu48X block
文章编号:
1004-4388(2021)06-0057-04
作者:
郝龙图
中国石油大庆油田有限责任公司测试技术服务分公司 黑龙江大庆 163000
Author(s):
 HAO Longtu
 Testing Technology Service Company, PetroChina Daqing Oilfield Company, Daqing, Heilongjiang 163000, China
关键词:
 ; 产出剖面; 微波持水率; 动态监测; 数据分析; 低渗透储层; 低流量测试; 液性特征; 原油黏度
Keywords:
 ; output profile;  microwave water holding capacity;  dynamic monitoring;  data analysis;  low permeability reservoir;  low flow test;  liquid
分类号:
TE355
DOI:
10.19680/j.cnki.1004-4388.2021.06.010
文献标志码:
B
摘要:
 葡48X区块油层为特低渗透储层、致密油开采，纵向较分散，平面连续性差，具有油质密度高、含水低的特点，开发动态监测难。采用微波持水率计产出剖面测井仪进行分层流量测试，利用微波在油、水中传播速度，以及衰减差异性计算介质含水率，得到分层油水产量。应用微波持水率计对葡扶1X井进行多点测试，现场试验分析确定1 5654 m测点处为主产层。对该井进行超声多普勒测井，对比井温数据结果表明，微波持水率计产出剖面测井结果更准确。该方法可对葡48X区块致密油开采进行有效动态监测，提高低含水率致密油分层产出测试精度，为油田精细开发提供新的技术手段。
Abstract:
 Pu48x block oil layer is a tight oil reservoir with ultralow permeability, and its vertical dispersion is scattered and plane continuity is poor. It has the characteristics of high oil density and low water cut, which makes it difficult to monitor the development performance. The microwave water holdup meter and production profile logging tool are used for layered flow test. The principle is to calculate the water content of the medium by using the propagation velocity of microwave in oil and water and the attenuation difference to obtain the layered oilwater production. The microwave water holdup meter is used to conduct multipoint test in Well Pufu1X. Through field test analysis, the measured point -1 5654 m is determined as the main production layer. Compared with the well temperature data, the profile logging result of the microwave water holdup meter is more accurate than ultrasonic Doppler logging method. This method can effectively monitor the tight oil production in Pu48x block, improve the layered production test accuracy of tight oil with low water cut, and provide a new technical means for fine development of the oilfield.

相似文献/References:

[1]曹银萍,黄宇曦,于凯强,等. 基于ANSYS Workbench完井管柱流固耦合振动固有频率分析[J].油气井测试,2018,27(01):1.[doi:10.19680/j.cnki.1004-4388.2018.01.001]
　CAO Yinping,HUANG Yuxi,YU Kaiqiang,et al. Natural frequency analysis for fluidsolid coupling vibration of completion string based on ANSYS workbench[J].Well Testing,2018,27(06):1.[doi:10.19680/j.cnki.1004-4388.2018.01.001]
[2]高 超,艾 昆,高 辉,等. 基于施工压力曲线的综合滤失系数测试方法及压裂参数优化[J].油气井测试,2018,27(01):8.[doi:10.19680/j.cnki.1004-4388.2018.01.002]
　GAO Chao,AI Kun,GAO Hui,et al.Test method of total leak-off coefficient and optimization of fracturing parameters based on operation pressure curves[J].Well Testing,2018,27(06):8.[doi:10.19680/j.cnki.1004-4388.2018.01.002]
[3]周小林,高志华,张 冲.龙凤山气田大通径免钻桥塞分段压裂先导试验[J].油气井测试,2018,27(01):62.[doi:10.19680/j.cnki.1004-4388.2018.01.010]
　ZHOU Xiaolin,GAO Zhihua,ZHANG Chong. Pilot tests of staged fracturing involving largediameter drillfree bridge plugs in the Longfengshan gas field[J].Well Testing,2018,27(06):62.[doi:10.19680/j.cnki.1004-4388.2018.01.010]
[4]魏 聪,陈宝新,刘 敏,等. 基于反褶积技术的S气井不稳定试井解释[J].油气井测试,2018,27(01):73.[doi:10.19680/j.cnki.1004-4388.2018.01.012]
　WEI Cong,CHEN Baoxin,LIU Min,et al. Interpretation of pressure transient well testing data of S gas well based on deconvolution technique[J].Well Testing,2018,27(06):73.[doi:10.19680/j.cnki.1004-4388.2018.01.012]
[5]张中宝.塔河油田深抽杆式泵一体化管柱工艺[J].油气井测试,2018,27(02):27.[doi:10.19680/j.cnki.1004-4388.2018.02.005]
　ZHANG Zhongbao.Deep integrated rod pumping string applied in Tahe Oilfield[J].Well Testing,2018,27(06):27.[doi:10.19680/j.cnki.1004-4388.2018.02.005]
[6]李军贤.地层出砂井测试工艺优化[J].油气井测试,2018,27(02):47.[doi:10.19680/j.cnki.1004-4388.2018.02.008]
　LI Junxian.Optimization of testing techniques for wells with formation sand production[J].Well Testing,2018,27(06):47.[doi:10.19680/j.cnki.1004-4388.2018.02.008]
[7]田向东,康 露,杨 志,等.海上油气井快速诱喷测试技术[J].油气井测试,2018,27(02):41.[doi:10.19680/j.cnki.1004-4388.2018.02.007]
　TIAN Xiangdong,KANG Lu,YANG Zhi,et al.Fast testing of induced flows in offshore oil/gas wells[J].Well Testing,2018,27(06):41.[doi:10.19680/j.cnki.1004-4388.2018.02.007]
[8]张 毅,于丽敏,任勇强,等.一种新型可降解压裂封隔器坐封球[J].油气井测试,2018,27(02):53.[doi:10.19680/j.cnki.1004-4388.2018.02.009]
　ZHANG Yi,YU Limin,REN Yongqiang,et al.A new type of degradable setting ball for fracturing packers[J].Well Testing,2018,27(06):53.[doi:10.19680/j.cnki.1004-4388.2018.02.009]
[9]褚春波,郭 权,黄小云,等.有限元分析径向水力压裂裂缝扩展影响因素[J].油气井测试,2018,27(02):59.[doi:10.19680/j.cnki.1004-4388.2018.02.010]
　CHU Chunbo,GUO Quan,HUANG Xiaoyun,et al.Finiteelement analysis on influencing factors for propagation of fractures induced in radial jet hydraulic fracturing[J].Well Testing,2018,27(06):59.[doi:10.19680/j.cnki.1004-4388.2018.02.010]
[10]庞伟.酸性气藏深井产能试井方法[J].油气井测试,2018,27(02):67.[doi:10.19680/j.cnki.1004-4388.2018.02.011]
　PANG Wei.Deliverability test method for deep sour gas wells[J].Well Testing,2018,27(06):67.[doi:10.19680/j.cnki.1004-4388.2018.02.011]
[11]闫正和. 水平井产出剖面监测新方法[J].油气井测试,2022,31(02):49.[doi:10.19680/j.cnki.1004-4388.2022.02.009]
　YAN Zhenghe. New methods for monitoring the production profile of horizontal wells[J].Well Testing,2022,31(06):49.[doi:10.19680/j.cnki.1004-4388.2022.02.009]
[12]林清金,沈开元,蒋应飞,等. 连续油管分布式光纤测井技术在产出剖面中的应用[J].油气井测试,2023,32(01):58.[doi:10. 19680/ j. cnki. 1004-4388. 2023. 01. 010]
[13]房鑫磊,赵洪绪. 高含CO2井产出剖面测试物性参数研究[J].油气井测试,2023,32(04):74.[doi:10.19680/j.cnki.1004-4388.2023.04.013]
　[J].Well Testing,2023,32(06):74.[doi:10.19680/j.cnki.1004-4388.2023.04.013]
[14]韩蓬勃. 压裂示踪剂监测技术在东胜气田M井应用分析[J].油气井测试,2024,33(02):58.[doi:10.19680/j.cnki.1004-4388.2024.02.010]
　[J].Well Testing,2024,33(06):58.[doi:10.19680/j.cnki.1004-4388.2024.02.010]
[15]梁豪,吴木旺,卢聪. 超深水基岩潜山储层分布式光纤温度试井方法[J].油气井测试,2024,33(03):1.[doi:10.19680/j.cnki.1004-4388.2024.03.001]
　[J].Well Testing,2024,33(06):1.[doi:10.19680/j.cnki.1004-4388.2024.03.001]
[16]秦昊,陈文安,秦民君,等. 基于FLUENT积液气井流动规律及测井资料解释方法[J].油气井测试,2024,33(05):42.[doi:10.19680/j.cnki.1004-4388.2024.05.007]
　[J].Well Testing,2024,33(06):42.[doi:10.19680/j.cnki.1004-4388.2024.05.007]

备注/Memo

备注/Memo:
 2021-05-12收稿，2021-10-15修回,2021-10-30接受,2021-12-20网络版发表
郝龙图，男，1983年出生，工程师，2007年毕业于中国石油大学（华东）石油工程专业，现主要从事生产测试及相关技术管理工作。电话：0459-5295902，13836766853；Email：286560595@qq.com。通信地址：黑龙江省大庆市采油二厂测试技术服务分公司第二大队，邮政编码：163000。
更新日期/Last Update: 2022-04-19