[1]王云川,周玉龙,袁浩仁,等.基于灰色关联法的滨425区块压裂效果影响因素分析[J].油气井测试,2021,30(01):73-78.[doi:10.19680/j.cnki.1004-4388.2021.01.013]
　WANG Yunchuan,ZHOU Yulong,YUAN Haoren,et al. Analysis on influencing factors of fracturing effect in Bin 425 block based on grey correlation method[J].Well Testing,2021,30(01):73-78.[doi:10.19680/j.cnki.1004-4388.2021.01.013]
点击复制

基于灰色关联法的滨425区块压裂效果影响因素分析()
分享到：

《油气井测试》[ISSN:1006-6977/CN:61-1281/TN]

卷:
30卷
期数:
2021年01期
页码:
73-78
栏目:
出版日期:
2021-02-25

文章信息/Info

Title:
 

Analysis on influencing factors of fracturing effect in Bin 425 block based on grey correlation method

文章编号:
1004-4388(2021)01-0073-06
作者:
 王云川1; 周玉龙1; 袁浩仁1; 李欣阳2; 马莅2; 卢聪2
 1.中石化胜利油田鲁明油气勘探开发有限公司 山东东营 257000
2.西南石油大学“油气藏地质及开发工程”国家重点实验室 四川成都 610500
Author(s):
 WANG Yunchuan1;  ZHOU Yulong1;  YUAN Haoren1;  LI Xinyang2;  MA Li2;  LU Cong2
关键词:
 ; 滨425区块; 低渗透油藏; 压裂效果; 油井产量; 影响因素; 灰色关联法; 加砂强度
Keywords:
 ; 

Bin 425 block;  low permeability reservoir;  fracturing effect;  oil well production; 

influencing factors;  grey correlation method;  sand adding intensity

分类号:
TE355
DOI:
10.19680/j.cnki.1004-4388.2021.01.013
文献标志码:
B
摘要:
 

胜利油田滨425区块开发前期单井压裂后产量提高不明显，且油井自喷和转抽后产量差异很小。为改进下一步压

裂措施，应用灰色关联法，结合该区块单井生产资料，从影响油井压裂效果的地质因素和工程因素两方面，对影响单井产量的主控因素进行分析，按权重给出了单井压后产能

影响因素的排序。结果表明，排量、加砂强度、产层有效厚度和孔隙度对单井压后产量有较大影响。压裂方案设计时，在缝高可以控制的层段应合理调整改造规模，提高加砂

强度和施工排量，增大改造体积，保证裂缝的长期导流能力。灰色关联法在滨425区块压裂效果影响因素分析中的研究结果，为低渗储层压裂参数优化和开发方案优选及改进

提供了依据。

Abstract:
 

In the early development stage of the Bin 425 block of Shengli Oilfield, the

production of a single well did not increase significantly after fracturing, and the production difference of the oil wells in spouting period and in

swabbing period was very small. In order to improve the fracturing measures in the next step, the gray correlation method is applied to analyze the main

control factors of the single well production from the two aspects of geological and engineering factors that affect the fracturing effect of the oil

well, combining with the production data of the single well in the block. According to the weight, the ranking of the factors affecting the productivity

of a single well is given. The results show that the displacement, sanding intensity, net thickness of the pay zone and porosity have a greater impact

on the production after fracturing. In the design of fracturing scheme, the reconstruction scale should be reasonably adjusted in the zone where the

fracture height can be controlled, the sand adding intensity and construction displacement should be increased, and the reconstruction volume should be

increased to ensure the longterm conductivity of the fracture. The research results of grey correlation method in the analysis of influencing factors

of fracturing effect in Bin 425 block provide a basis for the optimization of fracturing parameters and development scheme in low permeability

reservoir.

相似文献/References:

[1]曹银萍,黄宇曦,于凯强,等. 基于ANSYS Workbench完井管柱流固耦合振动固有频率分析[J].油气井测试,2018,27(01):1.[doi:10.19680/j.cnki.1004-4388.2018.01.001]
　CAO Yinping,HUANG Yuxi,YU Kaiqiang,et al. Natural frequency analysis for fluidsolid coupling vibration of completion string based on ANSYS workbench[J].Well Testing,2018,27(01):1.[doi:10.19680/j.cnki.1004-4388.2018.01.001]
[2]高 超,艾 昆,高 辉,等. 基于施工压力曲线的综合滤失系数测试方法及压裂参数优化[J].油气井测试,2018,27(01):8.[doi:10.19680/j.cnki.1004-4388.2018.01.002]
　GAO Chao,AI Kun,GAO Hui,et al.Test method of total leak-off coefficient and optimization of fracturing parameters based on operation pressure curves[J].Well Testing,2018,27(01):8.[doi:10.19680/j.cnki.1004-4388.2018.01.002]
[3]周小林,高志华,张 冲.龙凤山气田大通径免钻桥塞分段压裂先导试验[J].油气井测试,2018,27(01):62.[doi:10.19680/j.cnki.1004-4388.2018.01.010]
　ZHOU Xiaolin,GAO Zhihua,ZHANG Chong. Pilot tests of staged fracturing involving largediameter drillfree bridge plugs in the Longfengshan gas field[J].Well Testing,2018,27(01):62.[doi:10.19680/j.cnki.1004-4388.2018.01.010]
[4]魏 聪,陈宝新,刘 敏,等. 基于反褶积技术的S气井不稳定试井解释[J].油气井测试,2018,27(01):73.[doi:10.19680/j.cnki.1004-4388.2018.01.012]
　WEI Cong,CHEN Baoxin,LIU Min,et al. Interpretation of pressure transient well testing data of S gas well based on deconvolution technique[J].Well Testing,2018,27(01):73.[doi:10.19680/j.cnki.1004-4388.2018.01.012]
[5]张中宝.塔河油田深抽杆式泵一体化管柱工艺[J].油气井测试,2018,27(02):27.[doi:10.19680/j.cnki.1004-4388.2018.02.005]
　ZHANG Zhongbao.Deep integrated rod pumping string applied in Tahe Oilfield[J].Well Testing,2018,27(01):27.[doi:10.19680/j.cnki.1004-4388.2018.02.005]
[6]李军贤.地层出砂井测试工艺优化[J].油气井测试,2018,27(02):47.[doi:10.19680/j.cnki.1004-4388.2018.02.008]
　LI Junxian.Optimization of testing techniques for wells with formation sand production[J].Well Testing,2018,27(01):47.[doi:10.19680/j.cnki.1004-4388.2018.02.008]
[7]田向东,康 露,杨 志,等.海上油气井快速诱喷测试技术[J].油气井测试,2018,27(02):41.[doi:10.19680/j.cnki.1004-4388.2018.02.007]
　TIAN Xiangdong,KANG Lu,YANG Zhi,et al.Fast testing of induced flows in offshore oil/gas wells[J].Well Testing,2018,27(01):41.[doi:10.19680/j.cnki.1004-4388.2018.02.007]
[8]张 毅,于丽敏,任勇强,等.一种新型可降解压裂封隔器坐封球[J].油气井测试,2018,27(02):53.[doi:10.19680/j.cnki.1004-4388.2018.02.009]
　ZHANG Yi,YU Limin,REN Yongqiang,et al.A new type of degradable setting ball for fracturing packers[J].Well Testing,2018,27(01):53.[doi:10.19680/j.cnki.1004-4388.2018.02.009]
[9]褚春波,郭 权,黄小云,等.有限元分析径向水力压裂裂缝扩展影响因素[J].油气井测试,2018,27(02):59.[doi:10.19680/j.cnki.1004-4388.2018.02.010]
　CHU Chunbo,GUO Quan,HUANG Xiaoyun,et al.Finiteelement analysis on influencing factors for propagation of fractures induced in radial jet hydraulic fracturing[J].Well Testing,2018,27(01):59.[doi:10.19680/j.cnki.1004-4388.2018.02.010]
[10]庞伟.酸性气藏深井产能试井方法[J].油气井测试,2018,27(02):67.[doi:10.19680/j.cnki.1004-4388.2018.02.011]
　PANG Wei.Deliverability test method for deep sour gas wells[J].Well Testing,2018,27(01):67.[doi:10.19680/j.cnki.1004-4388.2018.02.011]

备注/Memo

备注/Memo:
 2020-10-23收稿，2020-12-20修回，2021-01-10接受，2021-02-20 网络版发表
国家油气科技重大专项“地震与井筒精细勘探关键技术”（2016ZX05006-002）

王云川，男，1971年出生，高级工程师，2005年毕业于中国石油大学（华东）采油工程专业，现

主要从事采油技术研究和管理工作。电话：0546-8222699，18615987167；Email：wangyunchuan.slyt@sinopec.com。通信地址：山东省东营市东营区济南路57号胜利油田鲁

明油气勘探开发有限公司，邮政编码：257000。

更新日期/Last Update: 2021-03-09