[1]张学山,李国伟,王洪军,等.新型钢丝作业防喷堵头[J].油气井测试,2020,29(02):43-49.[doi:10.19680/j.cnki.1004-4388.2020.02.008]
　ZHANG Xueshan,LI Guowei,WANG Hongjun,et al.A new type of blowout plug for steel wire operation[J].Well Testing,2020,29(02):43-49.[doi:10.19680/j.cnki.1004-4388.2020.02.008]
点击复制

新型钢丝作业防喷堵头()
分享到：

《油气井测试》[ISSN:1006-6977/CN:12-1485/TE]

卷:
29卷
期数:
2020年02期
页码:
43-49
栏目:
出版日期:
2020-04-25

文章信息/Info

Title:
A new type of blowout plug for steel wire operation
文章编号:
1004-4388(2020)02-0043-07
作者:
 张学山; 李国伟; 王洪军; 赵立安; 程子阳; 孙磊
 中国石油大港油田公司测试公司 天津 300280
Author(s):
 ZHANG Xueshan;  LI Guowei;  WANG Hongjun;  ZHAO Li′an;  CHENG Ziyang;  SUN Lei
 Testing company of PetroChina Dagang Oilfield Company, Tianjin, 300280, China
关键词:
 ; 试井;  钢丝作业;  防喷堵头;  防磨;  卡瓦捕捉器;  工具设计
Keywords:
 ; well testing;  steel wire operation;  blowout plug;  wear prevention;  slip catcher;  tool design
分类号:
TE357
DOI:
10.19680/j.cnki.1004-4388.2020.02.008
文献标志码:
B
摘要:
 钢丝试井作业普通防喷堵头密封级数少、安装紧固扭矩大、密封效果差、缺少仪器捕捉功能、磨损防硫钢丝。采取增加一级密封压帽和盘根、将73025 mm TBG 平式油管扣型改为Tr75×4扣型、丝扣缠上聚四氟乙烯带密封更改为双道“O”圈密封、增加卡瓦捕捉器和保护衬套等措施，研制出一种新型钢丝作业防喷堵头。室内承压试验和捕捉试验成功后，先后选择0～15 MPa井实测30多井次，均获一次成功。2019年大港油田512井次的实际应用表明，新型钢丝作业防喷堵头安全可靠，紧固扭矩降低15倍，材料消耗降低5倍，工作效率提高一倍以上，完善了钢丝试井作业工艺，对指导现场试井工作具有一定意义。
Abstract:
 The common blowout plug in the steel wire well test operation has few sealing stages, large installation tightening torque, poor sealing effect, lack of instrument catching function and wear of sulfur resistant steel wire. A new type of blowout plug for steel wire operation has been developed by adding onestage sealing and packing, changing the 73025 mm TBG flat tubing thread type to Tr75 × 4 thread type, changing the Teflon tape sealing with screw thread to twoway “O” ring sealing, adding slip catcher and protective bush. After the success of indoor pressure test and capture test, more than 30 wells of 0~15 MPa have been selected for field test, all of which have been successful for the first time. The practical application of 512 well times in Dagang Oilfield in 2019 shows that the new type of steel wire operation blowout preventer is safe and reliable, the tightening torque is reduced by 15 times, the material consumption is reduced by 5 times, and the working efficiency is increased by more than one time. This plug improves the performance of steel wire well test operation technology, which has a certain significance for guiding the field well testing.

相似文献/References:

[1]曹银萍,黄宇曦,于凯强,等. 基于ANSYS Workbench完井管柱流固耦合振动固有频率分析[J].油气井测试,2018,27(01):1.[doi:10.19680/j.cnki.1004-4388.2018.01.001]
　CAO Yinping,HUANG Yuxi,YU Kaiqiang,et al. Natural frequency analysis for fluidsolid coupling vibration of completion string based on ANSYS workbench[J].Well Testing,2018,27(02):1.[doi:10.19680/j.cnki.1004-4388.2018.01.001]
[2]高 超,艾 昆,高 辉,等. 基于施工压力曲线的综合滤失系数测试方法及压裂参数优化[J].油气井测试,2018,27(01):8.[doi:10.19680/j.cnki.1004-4388.2018.01.002]
　GAO Chao,AI Kun,GAO Hui,et al.Test method of total leak-off coefficient and optimization of fracturing parameters based on operation pressure curves[J].Well Testing,2018,27(02):8.[doi:10.19680/j.cnki.1004-4388.2018.01.002]
[3]欧阳伟平.致密气藏分段压裂水平井的不稳定压力与产量综合分析方法[J].油气井测试,2018,27(01):14.[doi:10.19680/j.cnki.1004-4388.2018.01.003]
　OUYANG Weiping. Comprehensive analysis method for transient pressure and production of multistage fractured horizontal well in tight gas reservoirs[J].Well Testing,2018,27(02):14.[doi:10.19680/j.cnki.1004-4388.2018.01.003]
[4]周小林,高志华,张 冲.龙凤山气田大通径免钻桥塞分段压裂先导试验[J].油气井测试,2018,27(01):62.[doi:10.19680/j.cnki.1004-4388.2018.01.010]
　ZHOU Xiaolin,GAO Zhihua,ZHANG Chong. Pilot tests of staged fracturing involving largediameter drillfree bridge plugs in the Longfengshan gas field[J].Well Testing,2018,27(02):62.[doi:10.19680/j.cnki.1004-4388.2018.01.010]
[5]魏 聪,陈宝新,刘 敏,等. 基于反褶积技术的S气井不稳定试井解释[J].油气井测试,2018,27(01):73.[doi:10.19680/j.cnki.1004-4388.2018.01.012]
　WEI Cong,CHEN Baoxin,LIU Min,et al. Interpretation of pressure transient well testing data of S gas well based on deconvolution technique[J].Well Testing,2018,27(02):73.[doi:10.19680/j.cnki.1004-4388.2018.01.012]
[6]张中宝.塔河油田深抽杆式泵一体化管柱工艺[J].油气井测试,2018,27(02):27.[doi:10.19680/j.cnki.1004-4388.2018.02.005]
　ZHANG Zhongbao.Deep integrated rod pumping string applied in Tahe Oilfield[J].Well Testing,2018,27(02):27.[doi:10.19680/j.cnki.1004-4388.2018.02.005]
[7]李军贤.地层出砂井测试工艺优化[J].油气井测试,2018,27(02):47.[doi:10.19680/j.cnki.1004-4388.2018.02.008]
　LI Junxian.Optimization of testing techniques for wells with formation sand production[J].Well Testing,2018,27(02):47.[doi:10.19680/j.cnki.1004-4388.2018.02.008]
[8]田向东,康 露,杨 志,等.海上油气井快速诱喷测试技术[J].油气井测试,2018,27(02):41.[doi:10.19680/j.cnki.1004-4388.2018.02.007]
　TIAN Xiangdong,KANG Lu,YANG Zhi,et al.Fast testing of induced flows in offshore oil/gas wells[J].Well Testing,2018,27(02):41.[doi:10.19680/j.cnki.1004-4388.2018.02.007]
[9]张 毅,于丽敏,任勇强,等.一种新型可降解压裂封隔器坐封球[J].油气井测试,2018,27(02):53.[doi:10.19680/j.cnki.1004-4388.2018.02.009]
　ZHANG Yi,YU Limin,REN Yongqiang,et al.A new type of degradable setting ball for fracturing packers[J].Well Testing,2018,27(02):53.[doi:10.19680/j.cnki.1004-4388.2018.02.009]
[10]褚春波,郭 权,黄小云,等.有限元分析径向水力压裂裂缝扩展影响因素[J].油气井测试,2018,27(02):59.[doi:10.19680/j.cnki.1004-4388.2018.02.010]
　CHU Chunbo,GUO Quan,HUANG Xiaoyun,et al.Finiteelement analysis on influencing factors for propagation of fractures induced in radial jet hydraulic fracturing[J].Well Testing,2018,27(02):59.[doi:10.19680/j.cnki.1004-4388.2018.02.010]
[11]郑天文. 自动举升试井防喷装置的研制及力学分析[J].油气井测试,2021,30(01):26.[doi:10.19680/j.cnki.1004-4388.2021.01.005]
　ZHENG Tianwen.Development and mechanical analysis of automatic lift well test blowout preventer[J].Well Testing,2021,30(02):26.[doi:10.19680/j.cnki.1004-4388.2021.01.005]
[12]王峻岭. 生产测井与试井联合作业技术[J].油气井测试,2021,30(02):51.[doi:10.19680/j.cnki.1004-4388.2021.02.010]
　WANG Junling.Combined operation technology of production logging and well testing[J].Well Testing,2021,30(02):51.[doi:10.19680/j.cnki.1004-4388.2021.02.010]
[13]陈业亭. 液面回声仪应用问题浅析[J].油气井测试,2021,30(02):56.[doi:10.19680/j.cnki.1004-4388.2021.02.011]
　CHEN Yeting. Analysis on application of liquid level echometer[J].Well Testing,2021,30(02):56.[doi:10.19680/j.cnki.1004-4388.2021.02.011]
[14]吴明录 ,李涛,赵高龙,等. 双重孔隙介质三区复合油藏水平井试井模型[J].油气井测试,2022,31(04):6.[doi:10.19680/j.cnki.1004-4388.2022.04.002]
　[J].Well Testing,2022,31(02):6.[doi:10.19680/j.cnki.1004-4388.2022.04.002]
[15]邵振鹏,韦建炬,潘秀英,等. 地面直读试井技术在临河油田自喷井及机采井应用效果分析[J].油气井测试,2022,31(04):31.[doi:10.19680/j.cnki.1004-4388.2022.04.006]
　[J].Well Testing,2022,31(02):31.[doi:10.19680/j.cnki.1004-4388.2022.04.006]
[16]王奎,张乾,滕俊男,等. 大港油田GY1井钢丝打捞作业[J].油气井测试,2022,31(04):42.[doi:10.19680/j.cnki.1004-4388.2022.04.008]
　[J].Well Testing,2022,31(02):42.[doi:10.19680/j.cnki.1004-4388.2022.04.008]
[17]谢文敏,陈燕,邹章明,等. 一种井筒液面位置准确识别与分析方法[J].油气井测试,2024,33(04):73.[doi:10.19680/j.cnki.1004-4388.2024.04.012]
　[J].Well Testing,2024,33(02):73.[doi:10.19680/j.cnki.1004-4388.2024.04.012]

备注/Memo

备注/Memo:
 2019-08-07收稿，2019-11-22修回，2020-02-15接受，2020-04-20 网络版发表
张学山，男，1972年出生，高级技师，助理工程师，2010年毕业于中国石油大学（华东）石油工程专业，现主要从事油气水井测试技术工作。电话：022-25946195,15822836291；Email： zxs_cnpc@163.com 。通信地址：河北省沧州市黄骅南大港管理区测试公司第二分公司，邮政编码：061103。
更新日期/Last Update: 2020-05-15